Technical publications, standards, and field-tested welding protocols.
Showing 9 of 115 articles
A fabricator once spent a full afternoon chasing porosity and cracking on a bracket repair, only to find the real culprit was a can…
A welder shows up for a 6G test, passes the root with a burning 6010 rod, then blows the whole weld with a soggy…
A weekend fabricator once told me his 1/8-inch 7018 kept sticking to the plate no matter how carefully he struck the arc — and…
A welder once laid what looked like a perfect stack-of-dimes 7018 bead on a structural column, only to have the joint crack hours later…
A shop apprentice once burned three 1/8-inch 7018 rods into a cold, lumpy uphill seam on 3/8-inch plate because his buzz box was cranked…
A hobbyist welder once set his 1/8-inch 7014 rod at 90 amps because that setting worked for the 6013 he used last week —…
Every year, thousands of welders walk into a test booth with a fixed pipe coupon angled at 45 degrees, knowing that a single root…
A welder on a jacket-platform job once told me he could run a beautiful 6G root with his eyes closed, then spent three straight…
For many welders, the first time they stare down a fixed 45-degree pipe joint with no rotation to lean on, the realization sets in:…
Field studies and calibration sheets, straight to your inbox. No spam.