Technical publications, standards, and field-tested welding protocols.
Showing 9 of 115 articles
A welder who has run ten thousand feet of perfect hull seam gets pulled off the line because his ABS certificate lapsed six months…
A cracked ABS motorcycle fairing, a split car bumper, a leaky ABS drain fitting — every week hobbyists and technicians throw away parts that…
A fabricator once spent an entire afternoon chasing an arc that kept wandering off the joint on a magnetized steel frame — only to…
Imagine you're laying down a bead on a heavy structural plate and the puddle either dribbles or burns through. Choosing the right amperage for…
A fabrication shop welder once told me he burned through an entire shift of flat fillet welds with a box of 5/32" 7024 rods…
A father in Willis, Texas wanted to teach his daughters to weld, and when he searched for classes he mostly found programs buried under…
A fabricator once spent an hour perfectly cladding a stainless frame, only to watch the whole assembly spring out of square the moment the…
If you've ever struck an arc with an E7018 rod and watched it sputter, stick, or leave slag inclusions, the issue is often not…
A welder with clean flat beads and solid 3G plate skills walks into a test booth, clamps a 6-inch pipe at a 45-degree angle,…
Field studies and calibration sheets, straight to your inbox. No spam.