Oxy-acetylene, gas welding, flames, and torch setup.
Showing 9 of 52 articles
Learn oxy-acetylene torch setup, safety, flames, welding/cutting, backfire prevention, and troubleshooting in a practical 7,000-word guide.
Use our oxy-acetylene welding tip size chart to match tip number to metal thickness, set oxygen and acetylene pressures, and fix common tip problems.
Learn exactly what oxy-acetylene welding pressures to use, why acetylene is capped at 15 PSI, and how to set regulators by tip size and…
Gas welding settings explained: oxy-fuel flame types, regulator PSI rules, TIG and MIG amperage charts, troubleshooting fixes, and safety limits.
Set up an oxy-acetylene rig the right way: regulators, hoses, pressures, leak testing, flame tuning, and the safety rules that keep you out of…
A fabricator rolls a full acetylene cylinder onto the job site, lights the torch, and within minutes the flame pops and snaps back toward…
A small fabrication shop faced with tight deadlines discovers that reliable equipment and consistent gas supply can make or break a job. For welders…
A service tech climbs into a tight attic at 4 p.m. with a leaking 3/4-inch copper line, and the only torch in the van…
A plumber standing in a damp basement with one small torch and a coil of solder can join copper lines in minutes — no…