Technical publications, standards, and field-tested welding protocols.
Showing 9 of 115 articles
A welder with ten years of structural steel experience walks into an aerospace shop, runs a beautiful test coupon on aluminum—and fails, because the…
A fabricator once clamped a perfect-looking steel frame flat to the table, ran every bead by the book, and unbolted it only to find…
A bridge inspector once traced a hairline crack back to a single rushed weld made on a windy job site — proof that welding…
A hobbyist welds a 1/8-inch 6061 panel with a MIG, and by the third tack the sheet has bowed so badly it no longer…
A fabricator once watched a 40-ton bridge girder fail ultrasonic testing because one narrow-groove weld was run too hot on a high-strength steel plate…
A fabricator I once read about lit his torch on a cold Monday morning, heard a sharp pop, and then a high-pitched hiss that…
Marcus had a welder's helmet, a pile of bills, and roughly fourteen weeks before his unemployment benefits ran out. He kept seeing ads promising…
A fabricator in Baldwin Park has a rush job on a Friday afternoon, the argon tank is empty, and the nearest big-box store is…
A welder with five years of shop experience walks into a rod-busting crew interview, confident — until the contractor slides the test coupon across…
Field studies and calibration sheets, straight to your inbox. No spam.