Technical publications, standards, and field-tested welding protocols.
Showing 9 of 115 articles
A welder walks into a fabrication shop for a job interview, and the tester points to a 6-inch pipe clamped vertically in the stand.…
A fabricator once spent an entire afternoon chasing a saggy, lopsided fillet weld on a base plate, only to realize the real problem was…
A welder walks into a fabrication shop for a position test, confident after months of rolling pipe in the 1G position — and the…
A hobbyist picks up a bottle of 75/25 argon/CO2 left over from his steel projects, runs a few beads on 6061 plate, and spends…
A welding student walks into a testing facility with three certificates of completion but no job offer, and the inspector tells him one blunt…
A shop foreman slides a fabrication drawing across the table and taps the callout: 'Fillet weld, 3/16 in, 1F.' The new welder stares at…
A first-year apprentice walks into the shop holding a work order that says '1G groove weld, procedure-qualified.' He nods confidently, strikes an arc on…
A hobbyist builds a 10S e-bike pack from salvaged 18650 cells, welds it with cheap strip at full power, and watches the first hill…
Imagine standing on a jobsite needing to join steel in tight quarters: a horizontal bracket or a vertical support. Knowing when and how to…
Field studies and calibration sheets, straight to your inbox. No spam.